● New 2016 UL 2272 & UL2271 Certified
High Quality 300 watts Brushless Motor ● 6.5 Inch Solid Rubber Tires with Tire Protective covers ● Matt finishing
● Samsung Lithium-Ion Rechargeable High Grade Battery pack ● Voltage: 36v Capacity: 4400mah ● Power output: 158wh ● Charging time: 2 - 3 Hours
● Min Charging life: 1,000 times ● Max weight: 265 lbs ● AC Charger: 100-240 V / 50-60 HZ - UL approved ● Max range: 12 Miles ● Max speed: 8 mph
● Turning Radius: 0º ● Max Up Hill: 15º ● Processor Single Core CPU ● Working Temperature: -15 °C to 50 °C ● High quality components
● Bluetooth Speakers ● LED Lights ● Remote Control ● Free App with Learner Mode
● Mechanical adjustment balancing gyroscope design ● Weight: 23.15 lbs // 10.5 kgs ● Anti-friction Silica Gel Pedals ● Long range and battery life
● Water and Dust Resistant (IP34)
● Includes: E-Glider ● Wall Charger ● Remote Control ● Owner's Manual ● Free App with Learner Mode
● Temperature Sensor: When the Phoenix CHIC E-Glider is running and the operating temperature becomes too high, the Phoenix CHIC E-Glider will respond by an alarm and the system will automatically slow down and then stop.
● Motor Perception Sensor: When the Phoenix CHIC E-Glider is running and one motor is blocked, the other motor will receive the information and adjust the speed automatically and consistently with the other blocked motor to maintain same speed on both motors thus protecting the rider and keeping them safe.
● The control board system with automatic detection function: The Phoenix CHIC E-Glider control board can identify if the motor and the battery is in good or bad condition automatically. When the motor or battery is in bad quality or defective the main control board will not match, and thus the unit will not work. Again keeping the rider safe.
● Reset function: When the rider rides on a bumpy surface, and the shift position sensor is offset, the main board will adjust to the original course according to the displacement automatically, and work normally
● Straight correction function: When accelerating, the board body may become off course due to uneven pavement, the system will auto-correct and it will maintain the good straight ridding ability, and the Phoenix CHIC E-Glider will not get out of control and there will not be any offset or shaking.
● Thicker aluminum main frame and ABS housing, New plastic injection molded parts and high-quality painting
● High quality EPE packaging, not EPS packaging materials, to protect the Phoenix CHIC E-Glider during the transportation
● The safety control system has three levels of anti-protection: dustproof, waterproof, anti-static, which can help fix electronic components
● With the Industrial cell: all are ST series imported from Europe, operating range from -40 °to 105 , in a very wide range and good reliability
● Mosfet pipe: With a greater amount of redundancy, the controller will not easily over-current, thus offering protection to the electronic component and the main control board;
● Auto Off protection function for Power: When in the rider forgets to turn off the power to the Phoenix Chic E-Glider, the unit will cut off the power automatically after ten minutes
● Original E-Glider PCB board - more stable capability
● Original and unique tooling model and structure, not the generic as in the market place. This makes the board more stable with a higher matching degree.